The Handmade newsletter is opt in.
To stop receiving our newsletter, just place the word
"remove" on the subject line and click reply.
Your friend not getting our newsletter even though they
requested to get them? They have not given a correct
email address or their
address has spam control on.
New items added to stock since Nov 2009:
Belton 9 pin w/ shield mount socket
Contact integrity of the Belton sockets is about the best around.
Cardas Clear metalized copper capacitor .47uF/400vdc
BNC C Signature RFI cap
1/8" headphone adapters/connectors (using Cardas's litz wire)
Cinch 56B terminal strip
Elna:
RFS SilmicII in 1, 2.2 & 3.3uF/50vdc
Cerafine in 47uF/50vdc
Nichicon FG Muse: 470uF/63vdc
WBT 210CU with green body
Belden:
8021 22 ga buss wire- 100 ft roll
19364 shielded 14 ga power cord by the foot
83337E power cord. 3-16 ga. silver plated copper
conductors
with silver plated copper shield, sold by the foot.
Teflon insulation. White outer insulation.
Hammond 1427G series strain reliefs- just a round
mount hole needed
LKG:
22 & 24 ga tinned solid core copper hookup wire
8" x 10" blank double sided FR4 pc board
PRP9372 1/2 watt in 82 & 5.1k ohm
Nichicon PLF conductive polymer in 270uF/16vdc
and 22uF/25vdc. Similar to the Sanyo OS/Con
but do not use Sanyo's orangic method.
Any good for audio? No idea at this time.
Velleman:
VTSS5U solder iron tips C2 & C3
3AG (6.35 x 32mm) slo blo fuses in 50,100 & 250ma
(packages of 10)
PSCM1 IEC male power inlet
PSCM2 IEC male power inlet with
built in GMA fuse holder
DVM 1100 & 9912 at a special price (limited quantities close to 50% off)
K2622 AM-FM signal amplifier kit
Velleman VTSSC60NU soldering tips. We have a few
of the styles available (SPB2,3 & 4).