Hammond 1427CG7 cord strain relief cordgrip
Wire diameter minimum- 10" maximum- .26" mount hole- .49"
Black nylon, liquid-tight cordgrip.
Used where cable is entering or leaving an enclosure.
Accepts a wide range of cable diameters due to large opening and highly
flexible strain relief elements, together with a TPE sealing ring.
The strain relief elements tighten in a circular sequence on the sealing ring to give
outstanding strain relief without twisting or damaging the cable.
Use the cordgrip with the smallest maximum diameter that will fit your application.
Nylon locknut included (as shown).
Designed to meet NEMA Type 4, 4X, 6, 6P, 12 & 13 - Protection to IP68.
UL94-V2 flammability rating.
UL, CSA, and VDE listed.
Questions? Call us at 610-432-5732
Hammond 1427CG7 cor...